Instrument/F&G Engineering Specialist
Full-time
Kintec Recruitment Limited
Instrument/F&G Engineering Specialist
Location: Qatar (Onshore - Ras Laffan/Doha HQ)Contract Type: Contract
Job Purpose
Advise and support Instrumentation/Fire & Gas (F&G) Engineering activities during EPC and Startup phases until handover to permanent Asset. Ensure project deliverables meet Operations expectations in terms of Safety, Operability, Reliability, and Maintainability over the facility design life cycle.
Key Responsibilities
- Provide Instrument/F&G engineering support, including design reviews (SIL workshops, assessment and verification, HAZOP), commissioning, startup, failure analysis, and advanced troubleshooting.
- Develop and implement surveillance and administration programs for critical Instrument and F&G Systems of new projects to achieve high standards of Reliability, Availability, and Cyber Security.
- Define and document best practices within the area of expertise and recommend performance improvement initiatives.
- Develop plans and work schedules to ensure effective completion of tasks and activities, meeting section and division KPIs.
- Provide technical input related to area of expertise to other disciplines and functions as required to support overall business objectives.
- Control and supervise the activities undertaken by contractors, consultants, and service providers.
- Guide less experienced engineers in implementing integrity and reliability systems.
- Support and facilitate smooth completion of project tie-in requirements for all systems under area of responsibility.
- Maintain Issue Register identifying and resolving critical issues, including new technology risks, which could impact new project Reliability, Availability, and Cyber Security.
- Support high-risk commissioning activities for complex and large-scale projects by undertaking stringent system surveillance, tuning and optimizing instrument and F&G systems, and providing advisory support to Operations and Maintenance.
- Ensure all activities are undertaken in compliance with Safety, Health, Environment, and Quality policies, regulations, and standards.
- Contribute to the development of local national employees.
- Ensure all activities comply with anti-trust and competition laws and firewall policies and procedures.
Requirements
- Bachelor's Degree in Engineering or equivalent.
- Minimum 8 years' experience in an oil and gas environment.
- Good working knowledge of DCS, PLCs, ESD/F&G Systems, Anti Surge Control Systems, Metering Systems, Turbine/Compressor Control Systems, and full knowledge of SIL requirements.
- Ability to work and make decisions under highly stressful conditions.
- Fluent in written and spoken English.
- Strong leadership and people skills.
- Proficient computer skills, including standard office software and procurement/ERP systems.
Desirable Competencies
- Understanding of Safety, Health, and Environment (SHE) requirements
- Strong planning and organizing abilities
- Ethics and integrity
- Initiative and commitment
- Teamwork and supporting others
- Interpersonal and communication skills
- Service orientation and innovation
- Problem-solving and job knowledge
- Supervising and coaching others
Vacancy posted 2 hours ago
Similar jobs that could be interesting for youBased on the Instrument/F&G Engineering Specialist in Doha vacancy
- ...Primary Purpose of the Job The Senior Commissioning Engineer (Instrumentation & Controls) is responsible for leading and coordinating the planning... ...Systems, Fibre Optic Communications Systems, MPFMs, F&G devices and systems, Firefighting systems, Functional Safety...
$12000 per hour
...Job Summary Design Engineer – Instrumentation, responsible for the detailed design and engineering of instrumentation and control systems for... ...marshalling details, and interfaces with DCS, PLC, ESD, SIS, F&G, and other control systems. - Perform instrument sizing...- ...Saipem is hiring! Saipem is a global leader in the engineering and construction of major projects for the energy and infrastructure sectors, both offshore and onshore. Saipem is “One Company” organized into business lines: Asset Based Services, Drilling, Energy Carriers...
- ...Primary Purpose of the Job Develop / review & endorse all Instrumentation, Automation Systems provisions for all QatarEnergy... ...Projects in terms of the Instrumentation, Automation and ELV engineering aspects (through Technical Submission Review and Approval process...
- ...Implement policies, procedures and strategies for the quality instrumentation maintenance to meet the overall PS-3 Oil & Gas Production &... ...end of each shift, update the Senior Operations Maintenance Engineer on the current situation within the section; discuss any problem...
- ...Job Summary The Electrical & Instrumentation Engineer / Inspector is responsible for conducting independent verification, inspection, and technical integrity assessments of offshore facilities and Safety Critical Elements (SCEs). The role involves verifying the condition...
$8000 per hour
...Summary Responsible for planning, coordinating and supervising instrumentation construction and obsolete component upgrade activities... ...- Bachelor’s Degree (or equivalent) in 1. Instrumentation Engineering 2. Electronics & Instrumentation Engineering 3....- ...in Doha, Qatar. Our client is looking to hire a Systems Engineer - CCTV Infrastructure Specialist who will be responsible for the design, implementation,... ...- Configure and manage virtualization platforms (e.g., Hyper-V, VMware) for scalable video and infrastructure...
- ...internal and external standards and regulations. Required Experience and Skills Minimum 18 years of experience in project engineering and management of power generation / distribution / transmission projects. Clear understanding of power generation,...
- ...Engineering Systems & Governance Specialist Location: Qatar Contract Type: Contract Contract Duration: 2 years (with possibility to extend) Job Purpose Responsible for coordinating, administering and maintaining engineering systems and governance processes...
- ...Instrument Technician Job Responsibilities # Install, calibrate, maintain, and troubleshoot field instruments, including... ...and ESD systems in coordination with control system engineers. # Ensure compliance with PTW, LOTO, HSE regulations,...
- ...JOB DESCRIPTION OFFSHORE INSTRUMENT & TELECOM SUPERVISOR Job Title: Offshore Telecom Supervisor... ...To: Offshore Instrumentation & Telecom Engineer Job Purpose: The Telecom Supervisor is responsible... .... • Certification in telecom systems (e.g., Cisco, Motorola, Alcatel, etc.) is a...
- ...Diploma or Technical Certificate in Instrumentation, Electronics, Electrical Engineering, or a related discipline. Minimum 5 years of relevant experience as an Instrument Technician in the Oil & Gas industry. Mandatory hands-on experience in loop checking and function...
- ...DUTIES & RESPONSIBILITIES Diploma in Instrumentation or equivalent with minimum of 8 to 10 years’ experience in the Supervision of Installation... ...of Pneumatic & Electronic Instrumentation, DCS, ESD, PLC, F&G, SCADA for Petrochemical, Refinery, Oil & Gas and onshore Projects...
- ...We are seeking an experienced Instrument Supervisor to oversee instrumentation activities at a project site in Mesaieed, Qatar. The ideal... ..., and Permit to Work (PTW) requirements. Coordinate with engineers, technicians, contractors, and other site teams. Monitor work...
- ...Saipem is a global leader in the engineering and construction of major... ..., you will respond to the Instrumentation Manager and be part of Saipem... ...with the other Project Team Specialists and Designers Coordinate... ...definition Participates to F.A.T. activities ad Vendor...
- ...Job Title: Senior Instrument Technician Job Location: Qatar Industry: Oil & Gas / Petrochemical Job Summary We are hiring experienced Instrument Technicians and Senior Instrument Technicians for an Oil & Gas Turnaround Project in Qatar. The selected candidates...
- ...Inspect installation of instruments, cabling, junction boxes, and control systems to ensure compliance with approved drawings and specifications... ...issue NCRs, and follow up until closure. Liaise with site engineers, QA/QC managers, and subcontractors to resolve quality issues....
- ...Field Service Engineer - Instrumentation & Controls (Mark VIe/Mark VI/ Mark V) Would you like to be part of our Turbomachinery Process Solutions... ...The Baker Hughes internal title for this role is: Field Specialist IV - SVS - CTRL About Us: We are an energy technology...
- ...Install, calibrate, and maintain field instruments (pressure, temperature, flow, level transmitters, control valves). Support loop checks... ...records, test reports, and maintenance logs. Work with engineers, supervisors, and contractors to meet project timelines. Follow...
- ...maintenance on property vehicles (i.e., engineering trucks, shuttle vans, electric carts) including... ...activities, including test results, instrument readings, and details of equipment... ...inspect tools, equipment, or machines (e.g., to identify defects). Reach overhead and...
- ...implementation, configuration and support of Microsoft Dynamics 365 (F&O, HR & SCM). Gather business requirements and translate them... ...: Bachelor's degree in IT, Computer Science, Software Engineering or related field. Minimum 7+ years of hands-on Microsoft...
- ...Title: Instrument Technician (CAT B) Instrument Technician CINT07 - Instrument Fitter KBR Sustainable Technology Solutions (STS) provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies...
- ...processes. The Laboratory Health Safety Specialist offers expert knowledge and skills in order... ...a range of specialized health areas, e.g., occupational exposure, ergonomics,... ..., Environmental Science, Public Health, Engineering) Minimum of 10 years' experience or equivalent...
- ...first line controlling and monitoring authority of controls and instrumentation team to carry out maintenance activities of installed plant... ...commissioning as and when required as per Instrumentation Engineer instructions. Witness ETS - PLC System T&C along with Company...
- ...navigate change, and achieve strategic business objectives. The specialist also plays a key role in cultivating a learning culture that... ...tailored learning offerings for different leadership levels (e.g., frontline, mid-level managers, senior managers) that focus on...
- ...Word and MS Excel applications. Knowledge of SAP applications and operations is required. Educational Qualifications University Degree in Engineering, Supply Chain or Business Management. Membership of international supply chain institution is desirable....
- Our customer is hiring for the following role: Job Title: SketchUp Specialist Department: Creative / Design Employment Type: Full-time, Permanent Location: Doha, Qatar Job Summary We are seeking a skilled SketchUp Specialist / 3D Visualizer to join...
$11700 per hour
...VAT Specialist Job Title: VAT Specialist Sector / Department: President Sector | Strategic Planning & Quality (Strategic Planning Section... ..., Finance, or a related field. Postgraduate qualifications (e.g., Master’s in Taxation, Economics, or Public Administration) and...$4000 - $5500 per month
Key Responsibilities * Maintain and update employees’ personnel files, ensuring all required documents are complete and properly documented. * Handle payroll processing and ensure accurate and timely salary payment * Prepare employment contracts, renewals, amendments...
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Instrument/F&G Engineering Specialist. Be the first to apply!
