People power our future. That is why advancing a dynamic, inclusive environment, where everyone grows and thrives is critically important to us.

Our ingenuity fuels daily life. Together, we’ve forged some of the most trustedpartnerships across the energy value chain to make what was once just an idea a reality: laying subsea infrastructurethousands of feet below sea level, installing offshoreplatforms hundreds of miles from shore, and using our expertise to design and build offshore wind infrastructure.

For more than 100 years, we've been making the impossible possible. Today, we're driving the energy transition with more than 30,000 of the brightest minds across 54 countries.

Here, what you do matters.

Job Overview:

Detailed knowledge of design techniques andanalysis methods, and detailed knowledge of the theory, content and application of standards, codes, and guidelines as applicable for offshore. Knowledgeable in project coordination and execution skills.

Responsibilities

Key Tasks and Responsibilities:

Becomefullyfamiliarwiththeproject scopeofwork,specifications,schedule andallinter-discipline requirements; includingidentifyingconcerns as early as practicable and taking appropriate initiative to address the issues. Interpret contractual requirements as they relate to engineering execution.
Identify changes toscopeandpromptly raise change notification, including providing any necessary supporting documentation and estimates. Provide similar support for Variation order.
Interfacewithalldisciplinestodevelopclashfreedesigns.
InterfacewithotherdepartmentstoobtaininputforDiscipline designsanddrawings.
Maintain close coordination with other engineering disciplines, Planning, Fabrication/Construction, Marine/Hook-up Commissioning and Project Management Team as required.
Document substantive communications (Communication that results in significant decisions or assignment of actions) and forward copies to Discipline Lead Engineer and Discipline Manager.
Prepare estimates for bid proposals, including technical query reviews, execution statements and workhour estimates, identifying software requirements and any other project-specific requirements.
Raise technical queries to obtain missing information, clarify work scope and to maintain preferred McDermott Procedures, specification, standards, practices and operational requirements.
Prepare, review, and (as a Lead Engineer) approve discipline engineering design basis, philosophies, and technical specifications, data sheets reports and procedures.
Participate in finalizing deliverables lists and deliverables, ensuring compliance with specifications and functional integrity.
Review project schedule and fabrication schedule in relation to construction sequence, milestones, model review and engineering scopes.
Attend project kick off and review meetings, vendor meetings, engineering meetings and offshore site surveys as required.
Provide technical direction and review of Designers products related to Electrical Engineering.
Attend 3D model reviews, safety workshops, constructability review & Client meetings.
Assist in providing necessary design inputs to other disciplines to enable them in proceeding withtheir deliverables.
Assist procurement personnel in procuring Discipline equipment, materials and services; ensuring that work produced complies with Customer objectives and procedures. Procurement assistance includes preparing, reviewing, and (as Lead Engineer) approving requisitions, evaluating technical quotations and preparing queries, compiling bid tabulations and recommendations, preparing purchase requisitions, and coordinating with Procurement to expedite vendor documents, as directed by Discipline Lead Engineer.
Assist in updating weight report based on receipt of vendor information.
Review and (as Lead Engineer) approve vendor and subcontractor submittals, checking for compliance with project specifications and providing comments as necessary.
Review and (as Lead Engineer) approve design verification through single-discipline check/ inter-discipline check {IDC}.
Provide technical support to fabrication queries, including identifying defect / rectification requirements.
Keep the Discipline Manager and Project Management Team apprised of all activities and concerns, technical, budgetary and manpower related.
Assist in providing inputs for actual, planning and forecasting progress reports including associated productivity.
Check final subcontractor and vendor data manuals to ensure that all requested data has been received and approved.
Present issues and problems to Customers in a timely manner and assist Lead Engineer in negotiating resolution in accordance with project and company requirements.
Perform (as required) Technical Quality Audit reviews in accordance with MOR Global Procedures.- Assist Lead Engineer with responses to Customer and other agencies (such as certifying authorities, auditors, third parties, etc.) on their review and approval.
Capture lessons learned and entered into MDR's Lessons Learned system.
Capture Knowledge Objects and enter into MDR's K.Now system.
Guide less experienced engineers on MOR and Discipline procedures, standards, worksheets, design calculations, software, requisitions, technical bid evaluations, technical queries, etc.
Supervise and guide assigned engineers and coordinate with project Lead Designers for Discipline engineering and design deliverablesincluding quality check list and audit readiness.-Responsible for the engineering integrity of the assigned work area.
Monitor costs and work hours of own work processes.
Assist in the maintenance of departmental technical guidelines and standard calculation notes.
Participate in development and maintenance of Global Procedures/standards &software validation.
May participate in standards development committees or task groups such as API.
Develop communication and presentation skills (e.g., write technical papers, participate in conferences and/or seminars, present design solutions, and/or present topics at "lunch and learns"; value moments etc.).
Identify and provide training to staff in specific techniques and proprietary software.
Provide information on employee performance to the Discipline Manager.
Assist Discipline manager in interviewing job applicants.
Review and (as Lead Engineer) approve material lists, P&ID, etc. for Electrical equipment / systems and services.
Update and (as Lead Engineer) approve specifications and data sheets for Electrical equipment and bulk materials.
Review and (as Lead Engineer) approve Electrical system studies / calculations including ETAP/SKM/
PSCAD. Perform electrical activities in SMART Plant Electrical and AVEVA Electrical, as required - Prepare, review and (as Lead Engineer) approve one-line diagrams and schematics diagrams.
Prepare, review and (as Lead Engineer) approve electrical equipment building layout drawings.
Prepare, Review (as Lead Engineer) and approve inputs to ECS/DCS I ESD / FGS (ICSS) system detail engineering.
Prepare, review and (as Lead Engineer) approve lighting calculations / illumination study for platform lighting system.
Prepare, review and (as Lead Engineer) approve load lists or update load lists issued by Customer.
Coordinate and arrange for equipment inspection, FATat vendor works.
Participate in FAT & inspection and preparation & resolution of punch lists on arrival of skid /material.
Prepare, review and (as Lead Engineer) approve spare part lists and preservation reports. Training of identified team personnel /national engineers
Review and (as Lead Engineer) approve Pre-commissioning and commissioning index and provide technical assistance on site during pre-commissioning and start-up as required.
Review and provide input to secondary cable routing (branch cable trays, channel trays, single tubing, etc.) where detailing not done.
Advise fabrication yard of installation locations for small Electrical equipment that are not sufficiently detailed in AFC drawings.
Prepare/reviewHook-upinstallationprocedures,offshoresurveyfortie-ins and check lists etc.
Identifythe materialsrequired foroffshore hook.
Coordinate with vendors for installation and pre-comm/commissioning including SAT.
Coordinate work content split between onshore fabrication and installation and Offshore installation and hook-up.
Review and check electrical equipment list and master electrical equipment list.
Participateinthechecking and (as Lead engineer) approval of key discipline deliverables such as:
- All electrical systems studies using approved software.
- I/O list, C&E chart and ESD logic diagrams.
- Specifications, Data Sheets, Requisitions, TBEs.
- SLD, Interconnection and troubleshooting drawings.
- Hazardous area classification drawings.
- Protection and control schematic diagrams.
- Electrical load list and equipment sizing calculations.
- Lighting calculations, earthing layout, cable ladder, cable routing and lighting layout.
- Electrical switchgear and battery room lay outs.
Participate in HAZOP, HAZID, ENVID, SAFOP and SIL studies.
Provide electrical input to pre-comm. activities and offshore hook-ups.
When acting as Lead Engineer, in addition:
- Act as a project-based discipline point of contact in communications and meetings with customer counterparts.
- Ensure substantive communication are documented.
- Prepare bid's projects and discipline engineering budget and execution plans, updating as required.
- Identify project staff needs based on knowledge of individual engineer's skill sets and provide requests to the discipline manager.
- Plan, organize and assign task, responsibilities and manhour budgets to the discipline team and verify tasks are completed within budgets.
- Plan discipline Level 4 detail deliverable schedule/register compliant with the overall execution plan.
- Prepare working forecasts identifying change management plans, corrective action and real-time schedule.
- ProvideDisciplineinputsforactual, planningandforecastingprogressreports including associated productivity.
- Alertprojectteamofanydeviation fromthescopeoraneedforchangeorder.
- MonitorKPImeasurementresults andtakecorrectiveactionasnecessarytoimprove discipline performance, including performance at interfaces with others.
- CoordinatewithotherDisciplineLeadEngineersandDesignerstoensuretimelyreceiptof necessary design inputs.
- Reviewandapproverequisitions,technicalquotationevaluationsandqueries,compiled bid tabulations and recommendations and purchase requisitions and coordinate with procurement to expedite vendor documents as required.
- LeadtheDisciplineteamduringprojectaudits (Internal, Customer and Third-party technical audits) and design reviews.
- ReviewcommentsfromCustomers &otheragencies on documents and drawings produced by the team and resolve. Give guidance on their update and incorporation.
- AssistDiscipline managerinthepreparationofquarterlyforecasts andmanpowerplanning.
- Anticipateprojectengineeringneedsandplanaccordingly.
- Coordinatewithvendorfordisciplinemanaged/procureditems.
- AssistDiscipline managerandProjectEngineeringManagerorProjectManagerin performance evaluation of project team members.
Perform conceptualstudy, PRE-FEED, FEED, and detailedengineering/analyses and design as per design basis, project specifications& datasheets, design codes and standards.
Apply in-depth skills and broad knowledge of the business to address complex problems and nonstandard situations.
Prepare clear and accurate detailed design calculations and analyses including design reports, procedures& Philosophies.
Manage own time to meet objectives, and (as Lead Engineer) forecast and plan resource requirements to meetschedule deadlines and targets.
Clearly communicate and explain difficult concepts and persuade others to adopt a point of view.
When acting as Lead Engineer, in addition:
- Direct small or medium Electrical Engineering team as a Lead Engineer.
- Lead the Discipline engineering design of the assigned work area and complete within planned schedule and budgets, in accordance with standards, MDR and project-specific procedures and to a high professional standard meeting the client requirements.
- Plan, organize and direct all aspects of Discipline execution on the assigned project including scope, deliverables, schedule and all resources - agree allocations with the Discipline Manager.
- Ensure interfaces and deliverables are clearly identified.
- Maintain responsibility for progress and productivity, identifying any required corrective action.
- Act as project representative for the Discipline during meetings with Project Team,
  Customer discipline lead and relevant agencies such as certifying authorities, auditors, third parties, etc.

Qualifications

Essential Qualifications and Education:

(Master's degree& UPDAis Preferred)
10+ years in oil and gas with major contractor or consultant predominantly performing detail design of offshore facilities.
Preferably RegisteredProfessional Engineer or member of engineering society.

Project / Area / Regional Specifics:

Project Planner, Project CostHook up /MarineGroup, Project Management Team, Document Control,Controller, QA and Certification Group, Procurement Group, Subcontractors andVendors, and Customers.

#J-18808-Ljbffr