WELDING INSPECTOR / QA TECHNICIAN
Finstockevarsity
WELDING INSPECTOR / QA TECHNICIAN
Overall Purpose: To ensure all welding activities and related processes on the project comply with approved specifications, procedures, and international codes. You will be the frontline for quality control, preventing defects and ensuring the structural integrity of the project.
Key Duties and Responsibilities
- Procedure & Qualification Review: Review and approve Welding Procedure Specifications (WPS), Procedure Qualification Records (PQR), and Welder Performance Qualifications (WPQ) in accordance with ASME Section IX, API 1104, and AWS D1.1 .
- In-Process Inspection: Conduct daily surveillance and visual inspections (VT) of welding activities at the fabrication yard and site. Check pre-heat, interpass temperature, electrode control, and weld joint preparation.
- Final Inspection & Documentation: Perform final visual inspection of completed welds. Maintain accurate and detailed records using Inspection & Test Plans (ITPs), checklists, and daily reports.
- NDT Coordination: Witness and review reports for Non-Destructive Testing (NDT) methods, including Radiographic Testing (RT), Ultrasonic Testing (UT), Magnetic Particle (MT), and Dye Penetrant (PT). A background in NDT Level II is a strong advantage.
- Non-Conformance Management: Identify, document, and report any non-conforming work. Issue Non-Conformance Reports (NCRs) and follow up on corrective actions until closure.
- Client & Third-Party Liaison: Act as the primary quality contact for client representatives and third-party inspection authorities during audits and hold-point inspections.
- Safety Compliance: Adhere to and promote a strict “Safety First” culture, following all project and company HSE (Health, Safety & Environment) policies at all times.
Mandatory Requirements
- Valid CSWIP 3.1 or AWS CWI certificate (must be presented).
- Minimum 6 years of relevant industry experience.
- Fluent in English (written and spoken).
- Must pass a comprehensive medical examination (including chest X-ray and drug screening) for work permit processing.
- Ability to work in a remote, hot climate and adhere to a 6-day work week schedule.
Vacancy posted 2 days ago
Similar jobs that could be interesting for youBased on the WELDING INSPECTOR / QA TECHNICIAN in Doha vacancy
- ...Inspect all welding activities including fit-up, pre-heat, inter-pass, and final weld inspections in accordance with applicable codes... ...Requirements Minimum 5 years experience as a Welding QC Inspector in the Oil & Gas industry CSWIP 3.1 or AWS CWI certification...
$12000 per hour
...The Inspector – QA/QC is responsible for performing quality inspections, tests, and verifications during manufacturing, assembly, and installation... ...with specifications, drawings, and standards. Verify welding, fabrication, machining, and assembly work according to...- Finstockevarsity in Doha, Qatar is seeking a Welding Inspector / QA Technician to oversee welding activities, ensuring compliance with specifications and international codes. Responsibilities include conducting inspections, maintaining records, and liaising with clients...
Finstockevarsity
Doha2 days ago - ...We are hiring an experienced QC Inspector - Welding for a reputed company in Qatar . Key Responsibilities Perform inspection of welding... ...and client representatives. Review and maintain QA/QC documentation including welding records, inspection reports...
- ...We are looking for an experienced QC Inspector – Welding for a reputed contracting company involved in Refinery, Petrochemical, and Fertilizer... ...AWS codes & project specifications ✔ Prepare and maintain QA/QC reports, inspection records, and dossiers ✔ Handle NCRs...
- ...Madre Integrated Engineering | Full time We are seeking a highly skilled Senior Welding Inspector with CSWIP 3.2.2 certification to join our team in Qatar. The ideal candidate will have extensive experience in welding inspection, quality control, and non-destructive...
Madre Integrated Engineering
Doha3 days ago - ...ROLE OVERVIEW We are looking for an experienced GRP Inspector to join a 3-month project assignment at Ras Laffan Industrial City, Qatar. The role covers both factory manufacturing inspection and site installation inspection of GRP/GRE piping systems for LNG and oil...
- ...new challenges and chances to work with diverse, talented individuals who will help you expand your horizons. WSP is hiring a QA Inspector to join our GEC team supporting Ashghal’s infrastructure, roads, and drainage projects in Qatar. If you’re committed to quality...
WSP
Doha1 day ago - ...Primary Purpose of the Job To perform & supervise all types of welding procedures and all type of fabrication works by referring to engineering drawings, specifications, sketches and field data for all type of materials and equipment installed at the refinery site,...
QatarEnergy Qatarization
Doha4 days ago - ...specialize in delivering innovative automation solutions to clients across industries. We are currently looking for a QA/QC PLC Automation Technician who is passionate about quality, detail-oriented, and ready to take on a challenging role in PLC panel assembly supervision...
- Support emergency planned SD's and TA related to valve shops in workshop activities. Should be able to develop, review / revise procedures related to Valve Shop activities. Take part in Internal/External & field audits as assigned and complete audit action items ...
Brunel GmbH
Doha10 hours ago - ...SENIOR QA/QC INSPECTOR (ADVANCE NDT) Interpret the suitability of products and processes against the designated specification requirements... ...Perform technical oversight of PAUT applications on carbon steel welds and dissimilar/clad weld configurations, including...
Airswift
Doha5 days ago - ...Responsibilities: Supervise welding activities as per project specifications and approved procedures. Coordinate with welders, fitters, inspectors, and site supervisors. Ensure welding work follows WPS, quality standards, and safety requirements. Monitor...
- ...in accordance with ASNT, API, and ASME standards Carry out weld inspection and structural integrity assessments in compliance with... ...two NDT methods (UT, RT, MT, or PT) ~ CSWIP 3.1 (Welding Inspector) or API 510 / API 570 / API 653 certification (mandatory) ~...
- Madre Integrated Engineering seeks a full-time Electrical Engineer to oversee inspection and quality monitoring of electrical installations in oil & gas projects. The successful candidate will inspect installations, review quality documentation, and ensure compliance with...
Madre Integrated Engineering
Doha4 days ago - ...Airswift is seeking a Senior QAQC Inspector in Doha, Qatar. The candidate will engage in advanced NDT techniques, ensuring compliance with... ...experience in Oil & Gas projects, expertise in PAUT, TOFD, and weld quality evaluation are essential for this position. The role...
Airswift
Doha3 days ago - ...mechanical and piping works including fabrication, installation, and welding activities to ensure compliance with project specifications and... ...Requirements Minimum 5 years experience as a QC Inspector in the Oil & Gas industry Hands-on experience in mechanical...
- Brunel GmbH is looking for a workshop support professional in Doha, Qatar. You will assist in valve shop activities, develop and revise procedures, and take part in audits. A key part of the role involves performing timely equipment inspections and supporting the Workshop...
Brunel GmbH
Doha10 hours ago - ...steelworks including: Fabrication – cutting, drilling, welding, camber, straightness, and dimensional tolerances Surface... ...injection, patch repair, steel replacement, corrosion protection) QA/QC Documentation & ITP Management Prepare and maintain:...
- ...Maintain inspection records, issue permits, and prepare reports for QA/QC teams. Safety Enforcement : Enforce offshore HSE... ...standards. Certifications & Training CISRS-OSTS Scaffold Inspector Certification (Basic/Advanced) BOSIET / HUET (OPITO certified)...
- ...Madre Integrated Engineering | Full time NDT Technician / Inspector and Assistance QC Inspector We are looking for a NDT Technician / Inspector... ..., ISO, ASTM standards Clientspecifications and internal QA/QC procedures Followcompany safety rules and quality...
Madre Integrated Engineering
Doha1 day ago - ...Job Description Position: QC Inspector (Civil) – QatarEnergy Approved Location: Ras Laffan, Qatar Project Duration: 03 Months... ...closure. Coordinate with construction, engineering, and QA/QC teams to resolve quality-related issues. Witness site tests...
$11000 per hour
...Job Summary We are seeking an experienced Material Inspector to support infrastructure and construction projects by ensuring materials comply with project specifications, quality standards, and applicable regulations. The ideal candidate will possess extensive GCC experience...- ...QA/QC Manager Industry: Oil & Gas / EPC / Contracting Role Overview We are... ...with clients, consultants, and third-party inspectors on QA/QC matters. Lead and manage QA/... ...Review and approve quality documentation, welding procedures, NDT reports, and test...
- ...We are seeking for a QA Engineer who will be responsible for maintaining and improving the Integrated Management System (IMS), ensuring compliance with quality standards, supporting audits, managing non-conformities, and driving continuous improvement initiatives across...
- A leading engineering firm in Doha is seeking an experienced Material Inspector to ensure compliance of construction materials with project specifications. The ideal candidate should have over 10 years of experience in infrastructure projects and a degree in Civil Engineering...
WSP
Doha1 day ago - ...Conduct inspections across various disciplines (civil, mechanical, welding, piping, E&I) as per approved ITPs. Review and verify... ...Instrumentation). ~5+ years' experience in multi-discipline QA/QC roles in EPC / Oil & Gas / Infrastructure projects. ~ Certifications...
Madre Integrated Engineering
Doha2 days ago - ...Oil & Gas operator to source a QA/QC Engineer for a long‑term contract... ...the activities of QA/QC Inspectors, contract hired engineers/inspectors and NDT Technicians, in compliance with procedure requirements... ...repair instructions including Welding Procedure Specification (WPS),...
Airswift
Doha1 day ago - ...We are looking for an experienced QC Inspector (Piping) to join our Oil & Gas project in Qatar... ..., including fabrication, installation, welding, and erection Verify compliance with... ...and maintain inspection reports, NCRs, and QA/QC documentation Coordinate with...
- ...C-scan mapping Radiography (RT) – film interpretation for welds and corrosion Visual (VT) – for surface defects, fit-up, and... ...Mandatory Certification ~ Valid API 570 (Piping Inspector) certification – mandatory and active. Experience...
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to WELDING INSPECTOR / QA TECHNICIAN. Be the first to apply!
